Power feed maintenance | table feed maintenance | common problems |power feed co

Installation method of AL-206Y

2021-06-29

1. Accessories for installation. The accessories used for installing AL-206Y are as follows: 1. Screw rod extension rod. 2. Reducing sleeve. 3. Hand wheel joint teeth....

Installation method of AL-310sX

2021-05-30

The AL-310sx power feeder is installed in the x-axis direction of the milling machine ，Because al-410sx al-510sx and al-310sx have the same overall dimensions and installation dimensions, their installation methods are also referred to in this paper...

AL-410sX'Installation method in x-axis

2021-05-30

AL-410sX'Installation method in x-axis ...

How to adjust the clearance by the number of gaskets?

2021-05-30

In order to install the milling machine power feed of ALSGS, it is necessary to adjust the clearance between the copper gear and the bevel gear through the washer,...

what's input voltage of power feed use?

2021-05-12

After the ALSGS electronic power feed is installed, we need to use a multimeter to measure the voltage of the power supply line...

What's The difference between AL-310s、AL-410s、AL-510s ？

2021-05-01

Alsgs electronic power feed can be divided into three types according to the power：AL-310s，AL-410s, AL-510s What's The difference between them？Each series has different machine models, corresponding to the three XYZ axes of the machine tool，...

What's the difference between AL-310sX、AL-310sY、AL-310sZ

2021-05-01

The last letter of the model represents the different axes installed on the machine tool. X represents the X axis installed on the machine tool;Y represents the Y axis installed on the machine tool;and Z represents the Z axis installed on the machine ...

What models are included in the AL-510s series ？

2021-05-01

The AL-510s series includes the following three models: first, the AL-510sx installed on the x-axis of the milling machine; second, the AL-510sy installed on the Y-axis of the milling machine...